Operator Preventive Maintenance Checks and Services Table (cont)

Operator Preventive Maintenance Checks and Services Table

Operator Preventive Maintenance Checks and Services Table (cont) - TM-10-5411-203-13_15

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
9

TM 10-5411-203-13 Operator Preventive Maintenance Checks and Services Table B - Before D - During Item Interval Item To Be Inspected Equipment Is Not No. Ready/Available B D Procedure If: 2 3 • • • • Remove debris, snow, or ice from top or sides of connector assembly (1) as needed. FRAME ASSEMBLY. Check frame assembly (4) for bends, breaks, and broken or missing parts. Check frame assembly's hinges, locking pins, and seals for breakage. Frame assembly (4) or hinges are damaged so frame assembly is not usable. Exterior frame assembly will not support fabric properly. EXTERIOR FRAME ASSEMBLY (TYPE II ONLY). Check swivel feet (1), header bar (2), and upright bars (3) for dents, bends, breaks, loose fittings, and broken or missing parts. Check support straps (4) for tears or breakage. 2-3

Privacy Statement
Press Release
Contact