TM 10-5411-203-13
1-8.
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (CONT)
Class A
TYPE II
Class B
Type II, Class A contains five components: a frame assembly (1) with attached weather resistant connector
assembly (2), an exterior frame assembly (3), bump thru doors (4), and a ramp (5). The frame assembly (1) is made of
lightweight aluminum and fits into the sidewall or endwall closeout panels on an ISO shelter. A one piece, weather
resistant connector assembly (2) is mounted to the frame assembly (1). Becket loops (6) on the connector assembly
attach to the TEMPER. The exterior frame assembly (3) connects to the ISO shelter. It is made of lightweight aluminum
poles and supports the connector assembly (2) on the frame assembly (1). Bump thru doors (4) can be installed into the
frame assembly (1) to minimize temperature loss thru passageway. The aluminum ramp (5) with non-skid surface serves
as a firm walkway between the ISO shelter and TEMPER.
Type II, Class B consists of the same frame assembly (1) with attached connector assembly (2), exterior frame
assembly (3) and bump thru doors (4), but includes an adjustable aluminum stairway assembly (7) in lieu of the ramp (5).
1-9.
DIFFERENCE BETWEEN MODELS. There are two types of the Complexing Kit Passageway. Type I attaches
between two ISO shelters. Type II attaches between an ISO shelter and a TEMPER. All configurations are available in
green and also in tan. See the following table for more information.
1-4
