TM 10-5411-201-14
T.O. 35E4-178-1
3-10.
STORM CONFIGURATION COMPONENTS, SUP-PORT BRACES, AND LEVELING JACK
EXTENSIONS REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Standard Tools
References
General mechanics tool kit
para.2-21. Operation in High Winds
Personnel - 2
REMOVAL
Storm Configuration Components
1.
Cut cable of six anchor assemblies (1) as close to ground as
possible.
Discard cable components.
2.
Unscrew two tiedown rings (3) from bottom of hinged floor panel (2).
Retain the two tiedown rings and store in equipment container.
NOTE
Drive rod (4), drive head (5), and holding handle
(6) can be removed from equipment container (7).
3-14
