TM 10-5411-201-14
T.O. 35E4-178-1
3-8.
(cont)
ECU Intake Panel
Inside shelter, loosen four captive screws (5) and remove ECU intake
panel (6).
ECU Return Panel
Inside shelter, loosen four captive screws (7) and remove ECU return
panel (8).
INSTALLATION
NOTE
ECU intake panel (6) and ECU return panel (8),
or sidewall closeout panels (2) are stowed in
roof panel when not in use.
Sidewall closeout
panels (4) are stowed on outside of hinged sidewall
when not in use.
ECU Return Panel
Position ECU return panel (8) in frame opening and secure by tightening
four captive screws (7).
ECU Intake Panel
Position ECU intake panel (6) in frame opening and secure by tightening
four captive screws (5).
Sidewall Closeout Panels
1.
Position sidewall closeout panel (4) in frame opening bottom first
and secure by tightening twelve captive screws (3).
2.
Position sidewall closeout panels (2) in frame opening and secure by
tightening four captive screws (l).
3.
Connect ECU ducts and turn on ECU.
(Refer to appropriate shelter
system manual.)
3-11
