CONTAINER LIFT JACK ASSEMBLY REPLACEMENT (cont)

CONTAINER LIFT JACK ASSEMBLY REPLACEMENT - TM-10-5411-201-14_76

STORM CONFIGURATION COMPONENTS, SUP-PORT BRACES, AND LEVELING JACK EXTENSIONS REPLACEMENT

TM-10-5411-201-14 Shelter Tactical Expandable One-Sided NSN 5411-01-124-1377 60 AMP Model NSN 5411-01-295-3433 100 AMP Model Manual
Page Navigation
58

TM 10-5411-201-14 T.O. 35E4-178-1 3-9. (cont) 3. Rotate handle (2) to lower jack until. upper (3) and lower jack attachments (4) will. disengage and jack is not supporting shelter. 4. Turn locking 5. Remove jack. handle (5) to rotate insert (6) in ISO fitting (7). CLEANING, INSPECTION 1. Clean jack assembly and component surfaces. 2. Inspect mounting surfaces for corrosion and damage. 3. Inspect for missing or damaged 4. Inspect for corrosion or paint components. damage. INSTALLATION 1. Rotate handle (2) to raise jack until insert (6) will enter lower ISO fitting (7) and upper jack attachment (3) engages jack support bracket (8) on corner post (9). 2. Turn locking handle (5) to rotate insert (6) in ISO fitting (7). 3. Install safety pin (1) through jack support bracket (8) under upper jack attachment (3). 4. Watch level indicator (10), and rotate handle (2) to raise jack until shelter is leveled. 5. Swing handle (2) down and secure in locking clip (11). 6. Remove blocks. 3-13

Privacy Statement
Press Release
Contact