TM 10-5411-201-14
T.O. 35E4-178-1
5-3.
POWER ENTRY PANEL ASSEMBLY REPLACEMENT AND REPAIR
This task covers:
a.
Removal
d. Repair
b. Disassembly
e.
Assembly
c.
Cleaning, Inspection
f.
Installation
INITIAL SETUP
Special TOOlS
Standard Tools
Hand blind riveter, Appendix B, Item 2
General mechanics tool kit
Crimping tool, Appendix B, Item 12
Personnel
Electrician
REMOVAL
W A R N I N G
Disconnect all power sources from power
entry panel assembly before removing.
1.
Inside shelter, remove screws (l),
lockwashers (2), and washers (3),
and carefully lift cover assembly
(4) away from personnel door end
endwall panel as far as it will go.
2. Disconnect wires at receptacles and
terminals/connectors from back
of power entry panel assembly (5).
NOTE
Tag all wires for reconnection.
3.
Outside shelter, drill out rivets
(6) and remove power entry panel
assembly (5) from personnel door
end endwall panel.
(Refer to
paragraph 4-33)
CHANGE 2 5-5