TM 10-5411-201-14
T.O. 35E4-178-1
4-25.
(cont)
3.
Drill out rivets (6) and remove
drip strip (7).
(Refer to paragraph 4-33)
4.
Strip seal (8) away from door
opening.
5.
Drill out rivets (9) and remove
light bracket (10).
(Refer to paragraph
4-33)
6.
Remove screws (11) and lockwashers
(12) and remove upper mobilizer
fitting (13).
Level Assembly
7.
Remove screws (14), lockwashers
(15), and setscrews (16) and
remove level indicator (17) from
level bracket (19).
8.
Drill out rivets (18) and remove
level bracket (19) from level pan
(20) .
(Refer to paragraph 4-33)
CLEANING, INSPECTION
1.
Clean panel and component surfaces.
2.
Inspect mounting surfaces for
corrosion and damage.
3.
Inspect for and replace if necessary:
a.
Missing or damaged components
b.
Corrosion or paint damage.
4-121
