RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR (cont)

RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR (cont) - TM-10-5411-201-14_122

TM-10-5411-201-14 Shelter Tactical Expandable One-Sided NSN 5411-01-124-1377 60 AMP Model NSN 5411-01-295-3433 100 AMP Model Manual
Page Navigation
102

TM 10-5411-201-14 T.O. 35E4-178-1 4-13. (cont) 7. Remove wire receptacles nuts (13) and disconnect wires from rear of duplex (11). NOTE Tag wires for reconnection. 8. Disconnect connectors (14 and 15) and separate conduit (6, 7, and 16) from outlet boxes (12). 9. Remove DISASSEMBLY screws (17) and outlet boxes (12) from fixed sidewall. 1. Remove duplex 2. Loosen screws (1) and covers (2). captive screws (3) and move duplex receptacles (4) away from junction boxes (5) as far as they will go. 3. Remove wire nuts (8) and terminals, and disconnect wires from rear of receptacles (4), where applicable, NOTE Tag wires for reconnection 4. Remove liquid tight connectors (6) from junction boxes (5) and separate connectors from electrical cords (7). 5. Remove captive screws (9) from junction boxes (5). CLEANING, INSPECTION 1. Clean cable and receptacle assembly and component surfaces. 2. Inspect mounting surfaces for corrosion and damage. 3. Inspect for and replace if necessary: a. Missing or damaged components. b. Corrosion or paint damage. 4-39

Privacy Statement
Press Release
Contact