TM 10-5411-201-14
T.O. 35E4-178-1
4-12. (cont)
R E P A IR
Repair corrosion or paint damage. (Refer to paragraph 4-44)
ASSEMBLY
1.
Position two light support plates (19) on light frame (3) and install
rivets (18).
(Refer to paragraph 4-33)
2.
Position ballast (16) in light frame (3) and secure with nuts (17).
3.
Connect two wires from ballast (16) to contacts on light frame (3) and
as follows:
Yellow to Yellow
Yellow to Black
4.
Connect four wires from ballast (16) to contacts at opposite end of
light frame (3) as follows:
Red to Black
Red to Black
Blue to White
Blue to White
5.
Secure all wires with wire nuts (9).
6. Assemble light shields (15) on fluorescent lamps (14) and install in
light frame (3) by sliding in and rotating.
7.
Install split retaining rings (13).
8. Attach cover (2) to light frame (3) with screws (l).
CHANGE 2 4-35
