RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR (cont)

RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR

RECEPTACLE OUTLETS TESTING, REPLACEMENT, AND REPAIR (cont) - TM-10-5411-201-14_121

TM-10-5411-201-14 Shelter Tactical Expandable One-Sided NSN 5411-01-124-1377 60 AMP Model NSN 5411-01-295-3433 100 AMP Model Manual
Page Navigation
101

TM 10-5411-201-14 T.O. 35E4-178-1 4-13. (cont) REMOVAL 1. Open velcro straps (1) securing electrical cords (2) to walls. 2. Disconnect wires from cable and receptacle assemblies at circuit breakers CB3, CB5, and CB7. (Refer to paragraph 4-46) and 4-47) NOTE Tag wires for reconnection 3. Using screwdriver, back out two captive screws (3) on each junction box assembly (4) and remove cable and receptacle assemblies from walls. 4. Open straps (5) securing conduit (6 and 7) to fixed sidewall. 5. Remove screws (8) and duplex receptacle covers (9). 6. Loosen captive screws (10) and move duplex receptacles (11) away from outlet boxes (12) as far as they will go. 4-38

Privacy Statement
Press Release
Contact