TM 10-5411-201-14
T.O. 35E4-178-1
4-14. WALL SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Special Tools
Personnel
General mechanics tool kit
Electrician
REMOVAL
1.
Set all circuit breakers and switches to OFF position.
2.
Remove two screws (1) and switch cover (2).
3.
Remove two screws (3) and carefully pull wall switch (4) out of switch box (5) as far as it will go,
4.
Disconnect wires from wall switch (4).
5.
Remove two screws (6) and lockwashers (7) and remove switch box (5) from wall.
INSTALLATION
1.
Position switch box (5) on wall and secure with two lockwashers (7) and screws (6).
2.
Position wall switch (4) near switch box (5) and connect wires to rear of switch. (Refer to paragraph
4-47.)
3.
Position wall switch (4) in switch box (5) and secure with two screws (3).
4.
Position switch cover (2) against switch box (5) and secure with two screws (1).
4-42
CHANGE 8
