TM 10-5411-200-14
T.O. 35E4-177-1
5-3. (cont)
DISASSEMBLY
1.
2.
3.
4.
5.
6.
Remove
(4).
Remove
Remove
screws (1),
receptacles
screws (9),
and washers (23).
Remove receptacles
lockwashers (2), receptacle covers (3), and nuts
(5 and 6) and gaskets (7) from panel (8).
lockwashers (10), receptacle covers (11), nuts (12),
(13 and 14) from panel (8).
Remove rubber cap (15), nut (16), lockwasher (17) brass washer (24),
nylon washer (25), two O-rings (26), nylon washer (27), and binding
post body (28) from panel (8).
Remove four nuts (18), three lockwashers (19), three washers (20),
terminal lug (21), and threaded stud (22) from panel (8).
CLEANING, INSPECTION
1. Clean power entry panel and component surfaces.
2.
Inspect mounting surfaces for corrosion and damage.
5-6
