TM 10-5410-284-13&P
TM 10602A-13&P
LIGHTWEIGHT MAINTENANCE ENCLOSURE
0009 00
SERVICE UPON RECEIPT - Continued
0009 00-4
Table 0009 00-2 LME Component Inspection.
LOCATION
ITEM
ACTION
REMARKS
1. Fabric Covers
Fabric Sections
1. Inspect for rips, tears, open seams and condition of
hook and pile fasteners, loose or missing grommets or
missing/ripped becket loops and fabric discoloration.
2. Inspect for damage to or improper attachment of
window components or vehicle door curtain
mechanism.
Reject a fabric section that cannot be repaired with a
tentage repair kit.
2. Frame Covers
Frame Sections
Inspect frame sections for damage such as bents and
deformations, missing parts, corrosion or loose
hardware.
Reject a frame section that does not unfold properly,
or has any of the above conditions.
3. Tent Pin Bag
Steel tent pins and
Inspect pins and stakes for correct quantity. Check for
wooden stakes
splits in wooden stakes and bent steel pins
Reject entire tent pin bag with above conditions.
4. Power Distribution Box
Power Distribution Box
1. Inspect Power Distribution Box for damage, such as
Container
deformations, loose or missing hardware, and
corrosion.
2. Check main panel, circuit breakers and light switch
for free and proper operation
3. Check condition of 25 ft and 10 ft extension cords.
Reject a Power Distribution Box with any of the above
conditions
5.Lights
Lights
1. Inspect lights for damage to end caps and plastic
cover, missing parts such as power cords, and
presence of fluorescent bulbs.
2. Inspect extension cord for frayed insulation and
missing/damaged plugs.
Reject a damaged light set, or one with any of the
above conditions
END OF WORK PACKAGE
