TM 10-5410-284-13&P
TM 10602A-13&P
LIGHTWEIGHT MAINTENANCE ENCLOSURE
0009 00
SERVICE UPON RECEIPT - Continued
0009 00-3
Table 0009 00-1 Inspection Criteria for Packaging
COMPONENT
ACCEPTABLE
REPARABLE
NON-REPARABLE
WOODEN BOXES AND CRATES
Hardware
Operative and tight.
Inoperative or loose.
None
Ends
Free from damage.
Broken or missing nails and
Damage that requires
Wood
Splits less than three inches
Splits more than three inches
Splits closer than 1 inch to
Nails, screws, and strapping
Nails, screws, and strapping
present and in good condition.
that can be replaced or sealed.
long, no closer than 1 inch to
but no closer than 1 inch to
edge of board or adjoining split
edge of board or adjoining
edge of board or adjoining
or over ½ inch wide.
split. The board must be
split, or ½ inch wide, that can
secured by at least one nail on
be repaired by use of
each side of the split when it
corrugated fasteners.
extends to the end of the
board.
bands.
disassembly of box.
FABRIC AND FRAME TRANSPORT COVERS AND TENT PIN BAG
Covers and Bags
Fabric has rips or tears less
Fabric has rips or tears more
Rips and tears not reparable
Handles
Handles are securely
Handles have some loose
Handles are not reparable with
than ½ inch long and at least 1
than ½ inch long and at least 1
with LME repair kit.
inch away from a seam. All
inch away from a seam. Some
seams are tightly closed.
seams are not tightly closed or
attached.
stitching or thread remnants.
tentage repair kit.
have thread remnant attached.
