TM 10-5410-230-13
4-7. FRAME ASSEMBLY (TYPE II ONLY).
This task covers: Repair
INITIAL SETUP
Tools:
Tool Kit, General Mechanics (Appendix B, Section III, Item 2)
Materials/Parts:
Header bar
Upright bar
Equipment Condition:
Frame removed from Boot Wall (refer to paragraph 2-8).
REPAIR
a.Remove Header and/or Upright Bar.
(1) Disconnect locking pins (1) that secure
upright bars (2) to swivel feet (3)
attached to HMMWV.
(2) Disconnect locking pins (4) that secure
upright bars (2) to header bar (5).
(3) Remove upright bars (2) from header bar
(5).
(4) Remove damaged upright bar (2) and/or
header bar (5).
b.Install Header and/or Upright Bar.
(1)
Position header bar (5) and/or upright bar
(2) inside Boot Wall.
(2)
Connect upright bars (2) to header bar (5)
and secure with locking pins (4).
(3)
Insert locking pins (1) to secure upright
bars (2) to swivel feet (3) attached to
HMMWV.
REPLACE
Replace unserviceable frame assembly with a serviceable one from stock.
4-11(4-12 blank)
