TM 10-5410-230-13
2-4. INSTALLING M577 BOOT WALL TYPE I.
NOTE
If a wall assembly is in place where Boot Wall is to be installed, it must
be removed prior to installation. See paragraph 2-3 for removal
instructions.
a.
Unpack M577 Boot Wall type I and inspect in accordance with Table 2-1, Operator PMCS.'
b.
Standing inside MCPS tent, line up Boot Wall end panel (1) and fasten it to MCPS tent roof cap (2) with quick
release fasteners (3).
c.
Starting at center of Boot Wall, line up pile fastener tape (4) on end panel assembly (1) with hook fastener tape
(4) on MCPS tent roof cap assembly (2) and press them together. Work from center outward in order to
prevent wrinkles in hook and pile fastener tapes.
2-10