TM 10-5410-230-13
Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (CONT).
Item
No.
Interval
Location
Item to
check/service
Procedure
Not Fully Mission Capable If:
M577 Boot Wall,
RWS Boot Wall,
S-250E Boot Wall
5
During
Boot Assembly,
End Panel
Assembly
Check for tears, punctures, and
separated seams on boot assembly
(1) and end panel assembly (2).
Tears, punctures or separated seams
exist which allow weather to enter or
light to escape Boot Wall.
6
During
Hook and Pile
Fasteners
Inspect all hook and pile fasteners (3)
for cleanliness and secure hold.
Remove dirt by brushing fastener
strips. Inspect Fasteners for loose
stitching to fabric.
Boot Wall can not be secured in
place because hook and pile
fasteners do not hold securely when
pressed together or are loosely
stitched to fabric.
7
During
Straps, Quick
Disconnect
Fasteners
Check Straps (4) and quick
disconnect fasteners (5) for fraying,
tears, broken hardware and loose
stitching to fabric.
Boot Wall can not be secured in
place because straps and quick
disconnect fasteners are frayed, torn,
broken or loosely stitched to fabric.
2-5
