Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (CONT)

Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (CONT) - TM-10-5410-230-13_18

Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (CONT) - TM-10-5410-230-13_20

TM-10-5410-230-13 Standard Integrated Command Post Systems Bootwalls Types I II & IV Classes 1 (Green) and 2 (Tan) Manual
Page Navigation
13

TM 10-5410-230-13 Table 2-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (CONT). Item No. Interval Location Item to check/service Procedure Not Fully Mission Capable If: M577 Boot Wall, RWS Boot Wall, S-250E Boot Wall 9 After Boot Assembly, End Panel Assembly Check for tears, punctures, and separated seams on boot assembly (1) and end panel assembly (2). Tears, punctures or separated seams exist which allow weather to enter or light to escape Boot Wall. 10 After Hook and Pile Fasteners Inspect all hook and pile fasteners (3) for cleanliness and secure hold. Remove dirt by brushing fastener strips. Inspect Fasteners for loose stitching to fabric. Boot Wall can not be secured in place because hook and pile fasteners do not hold securely when pressed together or are loosely stitched to fabric. 11 After Straps, Quick Disconnect Fasteners Check Straps (4) and quick disconnect fasteners (5) for fraying, tears, broken hardware and loose stitching to fabric. Boot Wall can not be secured in place because straps and quick disconnect fasteners are frayed, torn, broken or loosely stitched to fabric. 2-7

Privacy Statement
Press Release
Contact