TM 10-5410-229-13&P
Section V. UNIT TROUBLESHOOTING
4-9. GENERAL. Table 4-2 lists common malfunctions of the equipment and contains instructions for unit personnel
diagnosing and correcting each malfunction. Perform the indicated steps in the order listed.
NOTE
This manual cannot list all malfunctions that may occur. If a malfunction
is either not listed or cannot be corrected by the prescribed procedure,
notify your supervisor.
Table 4-2. Unit Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
FRAME ASSEMBLIES WILL NOT FIT TOGETHER.
Check for missing or bent frame components. Inspect for damaged fittings.
Replace any bent or missing frame components as described in
paragraph 4-14.
2.
TENT LEAKING
a. Check to make sure that windows are sealed, the stove pipe opening is closed, and all hook and
pile fasteners are secured.
b. Check for rips, tears, holes or separating seams in the roof cap or wall fabric assemblies.
Repair any rips, tears, or holes not exceeding 6 " in length as
described in paragraph 4-12. Refer more extensive damage to
direct support maintenance for repair.
4-8
