TM 10-5410-229-13&P
4-11.
REPAIR MAPBOARD ASSEMBLY - Cont’d
(1) Remove Rollable and Rigid Overlays.
(a)
Move cylinder locator (1) into horizontal position.
(b)
Remove rollable (2) and/or rigid (3) overlays.
(2) Replace Rollable and Rigid Overlays.
(a)
Place rigid (3) and/or rollable (2)overlays over cylinder locator (1).
(b)
Move cylinder locator (1) into vertical position.
4-12.
REPAIR TENT FABRIC ASSEMBLIES.
This task covers: a. Repair of Fabric Assemblies.
INITIAL SETUP
Tools:
Brush (Appendix B, Section III, Item 3)
Tentage Repair Kit (Appendix B, Section III, Item 1)
Materials/Parts:
Denatured Alcohol (Appendix F, Section II, Item 3)
Kote Seam Sealer (Appendix F, Section II, Item 4)
Tentage Repair Kit (Appendix B, Section III, Item 1)
Wiping Rags (Appendix F, Section II, Item 5)
Equipment Conditions:
Although the fabric assemblies can be repaired during operational use of the tent when necessary, it is recommended that
the fabric be repaired when the tent is not in use, since repairs are easier when the fabric assemblies are separated. The
fabric assemblies should be clean and dry.
a.
Repair Fabric Assemblies
Repair the following fabric assemblies, as required:
Plain Wall Liner
Plain Wall
Window Wall
4-11
