TM 10-5410-229-13&P
4-13.
REPAIR FRAME ASSEMBLY - Cont’d
(1) Remove Detent Assembly.
(a)
Loosen and remove two worm gear clamps (1) securing detent assembly (2).
(b)
Remove detent assembly (2).
(2) Install Detent Assembly.
CAUTION
Do not overtighten worm gear clamps.
(a)
Position detent assembly (2), with channels for worm gear clamps (1) parallel to end of frame member or
fitting (3).
(b)
Position two worm gear clamps (1) around frame member (3) and detent assembly (2). Ensure that clamps
(1) are placed in channels in detent assembly (2).
(c)
Alternately tighten worm gear clamps (1) until detent assembly (2) is securely attached to tube or fitting.
d.
Remove and Install Cable Assembly/Cord.
4-18
