TB 9-2320-360-13&P-2
LEFT BLAST DEFLECTOR REPLACEMENT - CONTINUED
0030 00
REMOVAL
1.
Position lifting device under left blast deflector (18).
2.
Remove bolt (14) and washer (15) from left blast deflector (18).
3.
Remove locknut (4), washer (3), bolt (12), and washer (13). Discard locknut.
4.
Remove four locknuts (16), washers (17), bolts (1), and washers (2) from left blast deflector (18). Discard locknuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Left side blast deflector weighs 134 lb (61 kg).
5.
Remove eight locknuts (8), washers (7) and, using lifting device, lower left blast deflector (18) to gain access to bolt (5).
Discard locknuts.
6.
Remove locknut (10), washer (11), bolt (5), washer (6), and bracket (9) from left blast deflector (18). Discard locknut.
7.
Using lifting device, remove left blast deflector (18) from vehicle.
3
4
1,2
5
6
18
7
17
8
14,15
9
16
12,13
417-110
10,11
CLEANING AND INSPECTION
0030 00-2
