TB 9-2320-360-13&P-2
RIGHT BLAST DEFLECTOR REPLACEMENT - CONTINUED
0031 00
REMOVAL
1.
Position lifting device under right blast deflector (1).
2.
Remove 12 locknuts (5) and washers (6) from right blast deflector (1). Discard locknuts.
3.
Remove 10 bolts (4), lockwashers (3), and washers (2) from right blast deflector (1). Discard lockwashers.
4.
Remove four locknuts (7), washers (8), bolts (10), and washers (9) from right blast deflector (1). Discard locknuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Right side blast deflector weighs 248 lb (112 kg).
5.
Using lifting device, remove right blast deflector (1) from vehicle.
1
10
2
9
3
6
8
4
5
7
417-111
0031 00-2
