TB 9-2320-360-13&P-2
RIGHT BLAST DEFLECTOR REPLACEMENT - CONTINUED
0031 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Right side blast deflector weighs 248 lb (112 kg).
3.
Position lifting device under right blast deflector (1).
4.
Using lifting device, install right blast deflector (1) on vehicle.
5.
Install four washers (9), bolts (10), washers (8), and new locknuts (7) on right blast deflector (1).
6.
Install 10 washers (2), new lockwashers (3), and bolts (4) on right blast deflector (1). Tighten bolts to 9 lb-ft (12 Nm).
7.
Install 12 washers (6) and new locknuts (5) on right blast deflector (1). Tighten locknuts to 23 lb-ft (31 Nm).
1
10
2
9
3
6
8
4
5
7
417-111
8.
Install muffler (TM 9-2320-360-20).
9.
Install right step (WP 0033 00).
END OF WORK PACKAGE
0031 00-4
