TB 9-2320-360-13&P-2
LEFT CAB SIDE (REAR) ARMOR REPLACEMENT - CONTINUED
0029 00
REMOVAL - CONTINUED
11.
Remove eight locknuts (46), washers (45), bolts (40),
and bracket (32). Discard locknuts.
37
12.
Remove two locknuts (33), washers (34), bolts (39),
38
36
31
and lifting eyes (31). Discard locknuts.
39
35
13.
Remove eight locknuts (35), washers (36), bolts (38),
34
40
and washers (37) from cab side (rear) armor (3). Dis-
card locknuts.
32 33
14.
Remove six locknuts (44), washers (43) and two stud
brackets (42) from cab side (rear) armor (3). Discard
locknuts.
41
3
WARNING
46
42
Use extreme caution when handling heavy
parts. Provide adequate support and use assis-
45
tance during procedure. Ensure that any lifting
device used is in good condition and of suitable
load capacity. Keep clear of heavy parts sup-
ported only by lifting device. Failure to follow
this warning may cause injury or death to per-
sonnel.
43
NOTE
417-145
44
Cab side (rear) armor weighs 240 lb (109 kg).
15.
Separate outer cab side (rear) armor (3) from inner cab
side armor (41).
CLEANING AND INSPECTION
0029 00-4
