TM 9-4931-374-13&P
3-29. WIRING HARNESS ASSEMBLY (SWITCHBOX TO DISTRIBUTION PANEL)--MAINTENANCE
INSTRUCTIONS (cont)
REMOVAL
INSPECTION
SIX WIRE ASSEMBLIES.
For removal procedures for the harness
a. Inspect for breaks, corrosion, and worn
assembly, refer to disassembly procedure on
or deteriorated parts.
page 3-46, paragraph 3-10, for electrical
installation.
b. Check continuity with an ohmmeter.
DISASSEMBLY
REPAIR
Repair by replacement. Refer to reassembly
HARNESS ASSEMBLY (1). Separate six wire
procedure on page 3-239, paragraph 3-30, for
assemblies (2).
wire assembly. (switchbox to distribution panel).
3-238
