TM 9-4931-374-13&P
3-30. WIRE ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
INITIAL SETUP (cont)
NOTE
WARNING
There are six wire assemblies tagged no. 1, no. 2,
De-energize shop set by placing circuit breaker on
no. 3, no. 4A, no. 6A, and no. 7 used in
power distribution panel connected to power source in
connecting the S7/S8 switchbox assembly to the
OFF position and disconnect 120/208V cable assembly
circuit breaker panel box PL1. Each assembly
from shelter.
consists of one 30.00-in. (76.20-cm) stranded
black wire with a lug terminal at one end. The
following procedures are written for only one
wire assembly and must be repeated for the
other five wire assemblies.
REMOVAL
INSPECTION
Refer to disassembly procedures on page 3-237,
1
LUG TERMINAL (1).
Check for missing,
paragraph 3-29, for wiring harness assembly
damaged, or corroded parts.
(switchbox to distribution panel).
2
WIRE (2).
a. Check for damaged insulation.
b. Check for broken conductors.
3-240
