TM 9-4931-374-13&P
3-30. WIRE ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
REPAIR (cont)
2
WIRE (2).
a. If disassembled but still useable, strip
0.5 in. (1.27 cm) of insulation from each
end.
b. If not repairable, replace with a new
fabricated part (fig. 3, app E).
REASSEMBLY
INSTALLATION
1
LUG TERMINAL (1)
AND
WIRE
(2).
Refer to the reassembly procedure on page
Assemble by crimping.
3-237, paragraph 3-29, for wiring harness
assembly (switchbox to distribution panel).
2
WIRE ASSEMBLY (3). If the tag number is
not present, add appropriate tag number.
3-242
