TM 9-4931-374-13&P
3-23. POWER SUPPLY MOUNTING--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY
INSTALLATION
1
TWO BRACES (1) AND POWER SUPPLY
(2). Position together.
2
SIX SCREWS (3). Install.
3
SIX LOCKWASHERS (4). Install.
4
SIX NUTS (5). Install.
1
POWER SUPPLY (1) AND POWER
SUPPLY MOUNTING (2).
Position in
place on shelter floor at cargo door end of
right table. The front of power supply
should face right when viewed from cargo
door.
2
FOUR SCREWS (3), FOUR LOCKWASHERS (4), AND FOUR FLAT
WASHERS (5). Assemble and install through two braces (6).
WARNING Open circuit breaker CB15
before
removing/installing wiring on the power supply.
3
WIRING. Connect to power supply according to reassembly procedure
(p 3-46) for electrical installation.
3-212
