TM 9-2330-390-14&P
4-101. AIR BAG REPLACEMENT (Cont).
3.
Raise axle assembly (18) and support with two trestles. Remove wheel and tire from each end of axle assembly
(see paragraph 4-76).
4.
Remove cap (12) and air bag valve (13) from stud (8).
5.
Remove two locknuts (11 and 14) and flatwashers (10 and 15) from studs (8 and 9) at suspension link mounting
plate (16). Discard locknuts.
6.
Lower axle assembly (18) until studs (8 and 9) are clear of suspension link mounting plate (16).
7.
Remove air bag (20) by turning air bag to remove stud (19) from axle mounting plate (17).
4-257