TM 9-2330-390-14&P
Change 4 4-263/(4-264 Blank)
Section XIII. BODY MAINTENANCE
4-103. TOOLBOX REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Four locknuts
Tools/Test Equipment:
General mechanic's tool kit (Item 30, Appendix G)
Torque wrench, 0-200 lb.-in. (Item 41, Appendix G)
NOTE
Note position of toolbox before removal. Toolbox MUST be installed in same posi-
tion.
1.
Open toolbox (1) and remove contents.
2.
Remove four locknuts (5), flatwashers (6), cap-
screws (2), packings with retainer (3), and tool-
box (1) from mounting brackets (4). Discard
locknuts.
1.
Install toolbox (1) on mounting brackets (4)
with four packings with retainer (3), capscrews
(2), flatwashers (6), and new locknuts (5).
Torque locknuts to 40 +/- 4 lb.-in. (4.52 +/- 0.45
Nm).
2.
Place removed contents in toolbox (1) and
close.
a.
REMOVAL
b.
INSTALLATION