TM 9-2330-390-14&P
4-244 Change 4
4-94.
FRONT DOLLY BRACE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
• Front dolly junction box bracket removed (right
side) (see paragraph 4-92).
• Front dolly hydraulic control valve bracket removed
(left side) (see paragraph 4-93).
• Shock absorber removed from suspension link
(see paragraph 4-102).
Materials/Parts:
• Four locknuts
Tools/Test Equipment:
• General mechanic's tool kit (Item 30, Appendix G)
NOTE
Left side and right side braces are replaced the same way. Right side brace Is Illus-
trated.
Remove four locknuts (1), eight flatwashers
(2), four capscrews (5), and brace (3) from
suspension link (4). Discard locknuts.
Install brace (3) on suspension link (4) with
four capscrews (5), eight flatwashers (2), and
four new locknuts (1).
Follow-on Tasks:
•
Install shock absorber on suspension link (see paragraph 4-102).
•
Install front dolly hydraulic control valve bracket (left side) (see paragraph 4-93).
•
Install front dolly junction box bracket (right side) (see paragraph 4-92).
a.
REMOVAL
b.
INSTALLATION
2
