TM 9-2330-390-14&P
4-248 Change 4
4-98.
PIVOTING TRAY LOCKOUT BRACE AND UPPER AND LOWER BRACKETS
REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
• Five locknuts
Tools/Test Equipment:
• General mechanic's tool kit (Item 30, Appendix G)
NOTE
Front and rear pivoting tray lockout braces and upper and lower brackets are
replaced the same way except location of lockout brace varies on front and rear piv-
oting trays. Rear pivoting tray lockout brace and rear upper and lower brackets are
illustrated.
1.
Remove safety pin (11) and hitch pin (12) and
unlock lockout brace (14) from lower bracket
(13).
2.
Remove locknut (15), flatwasher (16), cap-
screw (5), and lockout brace (14) from upper
bracket (2). Discard locknut.
3.
Remove two locknuts (3), flatwashers (4), bolts
(17), and upper bracket (2) from pivoting tray
(1). Discard locknuts.
4.
Remove two locknuts (7), flatwashers (8), cap-
screws (9), and lower bracket (13) from sus-
pension link (6). Discard locknuts.
5.
If hitch pin (12) and safety pin (11) are dam-
aged, replace with lanyard assembly (10) (see
paragraph 4-99).
a.
REMOVAL
