b. INSTALLATION
TM 9-2330-390-14&P
4-82.
PIVOT AXLE BRACKET REPLACEMENT (Con’t).
7.
Remove setscrew (21) nut (20) washer (19) and pivot bolt (22) from axle assembly (11) and pivot axle
bracket (18).
8.
9.
Raise top beam (1) 1-2 in. (2.5-5.0 cm) and remove pivot axle bracket (18) from bottom beam (7) and sus-
pension links (2).
Lower top beam (1) and rest bottom beam (7) on ground.
8
NOTE
1.
2.
3.
4.
5.
Perform steps 9 and 10 if only installing pivot axle bracket lockout brackets.
Coat mating surface of pivot axle bracket (18) and axle assembly (11) with grease.
Inspect pivot bolt (22) to ensure that threads are not damaged. If damaged, dress threads.
Install pivot axle bracket (18) on axle assembly (11) with washer (19) and nut (20) loosely installed on pivot
bolt (22).
Raise top beam (1) as required to aline holes in pivot axle bracket (18), suspension links (2) and bottom
beam (7).
Grease two clevis pins (15) and drive into suspension links (2).
NOTE
6.
An equal quantity of flatwashers must be installed on each side to reduce to a mini-
mum the gap between suspension link and bottom beam pivot area.
Install flatwashers (16) and new cotter pins (17) on clevis pins (15).
4-220
Change 3
