TM 9-2330-390-14&P
4-161
4-69.
REAR DOLLY PARKING BRAKE VALVE REPLACEMENT (Con't).
CAUTION
DO NOT overtighten fittings at parking brake valve or damage to parking brake
valve will occur.
NOTE
Male threads of fittings should be coated with antiseize tape if not already fac-
tory-coated with an antiseize compound.
1.
Install plug (1), tee (9), and elbow (12) on parking brake valve (11).
2.
Install parking brake valve (11) on pivoting tray (3) with two new lockwashers (4), screws (5), and nuts (2).
3.
Connect tube assembly (6) to elbow (12).
4.
Connect tube assemblies (7 and 10) to tee (9).
5.
Place parking brake lever (8) in ON position.
Follow-on Tasks:
Close air reservoir draincock (see paragraph 3-6).
Connect intervehicular air hoses (see paragraph 2-11).
Check for leaks (see paragraph 4-23).
b.
INSTALLATION