TM 9-2330-390-14&P
4-55.
FRONT AXLE ALIGNMENT CHECK.
This Task Covers:
Alinement Check
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Front and rear dollies attached and raised to ride
height position (see paragraph 2-10 and 2-11).
Two 43 In. (109 cm) or longer straightedges
Measuring tape (Item 28, Appendix G)
Steering locking pin installed in front axle and
Personnel Required: Two
steering link to lock steering (see paragraph 2-8)
ALINEMENT CHECK
1.
Using two 43 in. (109 cm) or longer straightedges (1) mark each straightedge with three marks:
a.
Place first mark at center of straightedge.
b.
Place second mark 21½ in. ± 1/32 in. (64.6 cm ± 0.8 mm) forward of center mark.
4-119