TM 9-2330-390-14&P
4-49.
IDENTIFICATION LIGHT CABLE ASSEMBLY REPLACEMENT (Con't).
3.
Remove tie-down straps from identification light
cable assembly (14). taillight assembly cable
assembly (15) and hydraulic lines. Discard tie-
down straps.
4.
Remove locknut (17) flatwasher (16) screw (12),
clamp (13) identification light cable assembly
(14) and taillight assembly cable assembly (15)
from bracket (11). Discard locknut.
5.
6.
Loosen three screws (21) and open cover (18) of rear junction box (22).
Remove screw (24) and black wire (25) of identification light cable assembly (14) from position 4 on terminal
block (23).
7.
8.
9.
Remove nut (20) and ground wire (4) from upper right screw (19).
Remove locknut (27) from cord connector (28).
Remove cord connector (28) sealing ring (26) and identification light cable assembly (14) from rear junction
box (22).
10.
Loosen nut (29) and remove identification light cable assembly (14) from cord connector (28).
4-102
