TM 9-2330-390-14&PSection II. EQUIPMENT DESCRIPTION AND DATAParagraphNumberPageParagraph Title Number1-10.1-11.1-12.1-13.1-14.1-15.Table 1-2.Equipment Characteristics, Capabilities, and Features. . . . . . . . . . . . . . . . . . . . . . .Location and Description of Major Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Location and Contents of Data Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Location and Contents of Decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Location and Contents of Stencils. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Equipment Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Characteristics and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-41-61-111-211-231-241-241-10. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES.a. The M1022A1 Dolly Set consists of two separate and independent halves: a front dolly and a rear dolly.(1) me dolly halves attach to an International Standard Organization (ISO) container or shelter to makeup the dolly set trailer.(2) Using dolly set power, the shelter or container is raised to traveling height and leveled. The dolly settrailer can then be coupled to a towing vehicle and transported to a new location.(3) A 15,009 lb (6810 kg) maximum payload can be lifted and towed by the M1022A1 at 55 mi/h(89 km/h) highway speed.(4) Authorized towing vehicle is any military tactical wheeled vehicle of 5 ton rating or greater,equipped with a pintle assembly and standard electrical and airbrake connections.(5) Two dolly sets without shelters can be towed in tandem. Maximum towing speed when tandemtowing is 25 mi/h (40 km/h) for off public road use only.(6) The dolly set, with or without shelter, can hardbottom ford up to a depth covering the wheel hubs.(7) The dolly set can be transported by highway, rail, marine, and air modes.b. Features of the M1022A1 include:(1) a 12-volt electrical lighting system with 24-volt blackout lights.(2) four-wheel full air wedge brakes, emergency breakaway braking, and rear dolly parking brakes.(3) front and rear drawbars with caster wheels; front drawbar has a fixed lunette.(4) hydraulic loading/lifting system, powered by a diesel engine, on each dolly half. In the event ofsystem failure on one dolly, the hydraulic system is configured to accommodate an optional redundant power kit,used only for end lift operations.(5) suspension air bag and standard automotive shock absorber,1-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
