TM 9-2330-390-14&P
1-11.
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (Con’t).
Key
Component
Description
3
Lift Cylinders
Raise and lower shelter.
4
Transportation Lockouts
In the event of hydraulic system failure, support dolly set and shelter
during transport.
5
Ladder
Used to reach top beams to remove and install twist locks.
6
Top Beams
Provide adjustable attachment point for top of shelter.
7
lntradolly Airbrake Hoses
Provide intradolly airbrake and electrical connections.
and Electrical Cable
(Stowed Position)
8
Rear Drawbar
Attaches to fixed rear axle. Used for manual positioning of rear dolly.
9
Positioning Cylinders
Position top and bottom beams at the shelter. Housed inside
telescoping vertical tubes of top and bottom beams.
10
Top Hooks
Engage with top of shelter.
11
Marker Clearance Lights
Indicate presence of dolly set from the side. Front lights have amber
lenses; rear lights have red lenses.
12
Bottom Beams
13
Twist Locks
14
Toolbox (Front Dolly)
Provide adjustable attachment point for bottom of shelter.
Secure top and bottom beams to each other or to shelter.
Provides covered storage for all dolly set Basic Issue Items (Bll) and
Components of End Item (COEI).
15
Intervehicular Airbrake
Hoses (Front Dolly)
Provide service and emergency air connections to operate brakes.
16
Safety Chains
(Front Dolly)
Prevent dolly set from fully breaking away from towing vehicle.
17
18
Front Drawbar
Attaches to steerable front axle to aid in steering of front dolly. Has
(Front Dolly)
a fixed towing lunette.
Lunette
Couples to towing vehicle pintle assembly.
1-7
