TM 9-2330-390-14&P
4-38.
MARKER CLEARANCE LIGHT MAINTENANCE (Cont).
4.
If damaged, replace marker clearance light connector plug (11) (see paragraph 4-26).
2.
3.
Remove two screws (4) and lens housing (3) from body (1).
Remove four locknuts (5), ground wire (6) (front dolly only), four flatwashers (7), lockwashers (8), screws (10),
and body (1) from bracket (9). Discard lockwashers and locknuts.
3.
Connect marker clearance light connector plug (11) to cable assembly connector plug (12). Wrap connector
plugs with new tie-down straps.
1.
Install body (1) on bracket (9) with four screws (10), new lockwashers (8), flatwashers (7), ground wire (6) (front
dolly only), and four new locknuts (5).
2.
Install lens housing (3) on body (1) with two screws (4).
Follow-on Tasks:
Connect Intervehicular cable to towing vehicle (see paragraph 2-11).
Check operation of marker clearance light.
4-69