TM 9-2330-379-14&P
WHEEL, TIRE, AND TUBE
This task covers:
a
Service
b. Removal
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool set
No special requirements
Air pressure gage
Hydraulic jack
Wheel nut socket wrench
ACTION
LOCATION
ITEM
REMARKS
SERVICE
1 Wheel and
Inner tube
a.
Check air pressure in each tire.
tire (1)
valve stem (2)
b.
Inflate tire to proper pressure as
necessary (page 1-11).
c.
If tire continues to lose air, proceed
to removal of wheel and tire below.
REMOVAL
CAUTION
Chock other wheels and tires of dolly before
removing any wheel and tire.
2 Wheel and
Ten nuts (3)
Using wheel nut socket wrench, loosen
tire (1)
nuts (3).
Do not remove at this time.
CAUTION
Ensure that applicable lower adapter is fully sup-
ported prior to raising damaged tire with hydrau-
lic jack to avoid possible equipment damage.
3 Hydraulic jack
Using hydraulic jack (4) placed under lower
(4)
adapter (5), raise lower adapter (5) until
wheel (6) is off the ground.
4Ten nuts (3)
Using wheel nut socket wrench, take off
nuts (3) from hub studs (7).
3-5
