TM 9-2330-379-14&P
INTERVEHICULAR CABLE
This task covers
a. Removal
b. Installation
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
When dolly set is connected together without a
shelter, the front harness assembly (inter-
vehicular cable) is coiled and secured to the
roadside of the rear dolly.
1 Junction
Intervehicular
Remove front intervehicular harness connector
box (1)
cable harness (2),
P2 from junction box 12 volt connector J2, or
12 volt connector
remove front intervehicular harness connector
J2 (3), and 24
P3 from junction box 24 volt connector J3, as
volt connector J3
applicable.
(4) on junction
box
INSTALLATION
1 Junction
Connectors J2 (3)
Connect front intervehicular harness connector
box (1)
and J3 (4) on
P2 to junction box connector J2 (3), or connect
junction box
front intervehicular connector P3 to junction
box connector J3 (4), as applicable, depending
upon towing vehicle battery voltage.
3-9/(3-10 blank)
