TM 9-2330-379-14&P
CHAPTER 3
OPERATOR MAINTENANCE
OVERVIEW
This chapter contains all the lubrication, troubleshooting, and maintenance instructions and
procedures authorized at operator level.
Page
Section I.
Lubrication Instructions ..........................................................
3-1
Section II.
Operator Troubleshooting Procedures ...................................
3-1
Section III.
Operator Maintenance Procedures ........................................
3-4
Section I LUBRICATION INSTRUCTIONS
Lubrication under usual and unusual conditions and the lubrication chart for the dolly set are
contained in organizational maintenance, chapter 4.
Section II OPERATOR TROUBLESHOOTING PROCEDURES
Page
Page
Explanation of Columns ....................
3-1
Operator Troubleshooting
Introduction .......................................
3-1
Table......................................
3-2
Symptom Index ...........................
3-2
INTRODUCTION
This section lists the common malfunctions that may be found during the operation of the dolly set or
components. Perform the test/inspection and corrective action in the order listed.
This table cannot list all the malfunctions that may occur, nor all tests or inspections and corrective
actions. If a malfunction is not listed, or if it is not corrected by the listed corrective action, notify your
supervisor.
EXPLANATION OF COLUMNS
MALFUNCTION
Visual or operational indication that
something is wrong with your equipment.
TEST OR INSPECTION
Procedure used to isolate the problem to
a system or component.
CORRECTIVE ACTION
Procedure used to correct the problem.
SYMPTOM INDEX
This symptom index is provided as a quick way to get you to the part of the trouble-shooting table
that will help you solve the problem you are having. It lists all the malfunctions covered in the
organizational troubleshooting table.
3-1
