TM 9-2330-379-14&P STRUT ASSEMBLY - CONTINUED ACTION LOCATION ITEM REMARKS DISASSEMBLY 5 Strut Clamp assembly Remove screw (3) and nut (4) to allow weldment (1) (2), screw (3), clamp assembly (2) to be removed from and nut (4) strut weldment (1). 6 Strut Pin (6), cotter Remove cotter pin (7) and flat washer weldment (1) pin (7) and (8) that hold two strut weldments (1) and strut flat washer (8) and (5) together with pin (6). weldment (5) 7 Pin(6) Remove pin (6) and separate the two strut weldments (1) and (5). 8 Strut Quick release Slide quick release pin (9) out of weldment (1) pin (9) and strut weldment (1). cable (10) 9 Cable (10) Detach cable (10) from strut weldment (1). 10 Quick release Cable (10) and Detach cable (10) and sleeve (11) from pin (9) sleeve (11) quick release pin (9). ASSEMBLY 11 Strut Strut pin holes Grease inside surface of both strut pin weldment (1) holes with automotive grease. 12 Telescoping Grease entire surface (full length) of strut arm (5) telescoping strut arm with automotive grease. 13 Quick Cable (10) and Attach cable (10) and sleeve (11) to release sleeve (11) quick release pin (9). pin (9) 14 Strut Quick release Attach quick release pin (9) and cable weldment (1) pin (9) and (10) to strut weldment (1). cable (10) 15 Strut Strut weldment Place the two strut weldments (1) and (5) weldment (1) (5) and pin (6) in a position to be joined, and secure with pin (6). 4-153