TM 9-2330-379-14&P
Section XI FRAME AND TOWING ATTACHMENT MAINTENANCE
Page
Page
Cable Assemblies....................................................
4-165
Strut Assemblies.. ............................. 4-152
Locking Lug ............................................................
4-158
Towbar .. ........................................... 4-162
Pintle .......................................................................
4-160
Upper Connectors. ............................ 4-157
Safety Chains. .........................................................
4-166
STRUT ASSEMBLY
This task covers:
a.
Removal (page 4-151)
c.
Assembly (page 4-153)
d.
Installation (page 4-155)
b.
Disassembly (page 4-153)
INITIAL SETUP
Tools
Materials/Parts
General mechanics tool set
New cotter pins
Grease (item 2, Appendix E)
Equipment Conditions
No special requirements.
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Never attempt to remove the strut assemblies and
hydraulic cylinders at the same time unless provisions
have been made to fully support the adapter and to
allow the adapter to be lowered to the ground.
Personnel injury could result if proper support is not
provided.
WARNING
The dolly should be lowered and the strut assemblies
must be in open position before attempting to remove
strut assemblies to reduce the possibility of personnel
injury.
1
Adapter (1)
Pin (2), two cotter
Remove two cotter pins (3) and two flat
pins (3), and two
washers (4) securing pin (2) to adapter
flat washers (4)
(1).
4-151
