TM 9-2330-379-14&P
HUB AND BRAKE DRUM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WHEEL BEARING REMOVAL
9
Spindle (7)
Inner bearing
Remove grease seal (6). Take out
cone (5)
using a hammer and drift.
NOTE
Do not perform steps 10 and 11 unless new bearing
cups are being installed.
10
Inner bearing
Remove using a hammer and drift.
cup (4)
11
Outer bearing
Remove using a hammer and drift.
cup (2)
CAUTION
Do not dry or spin wheel bearings with compressed air.
12
Outer bearing
a.
Clean bearings with dry-cleaning
cone (1) and
solvent (SD-2).
inner bearing
b.
Dry bearings with a clean lint-free
4-147
