HUB AND BRAKE DRUM - CONTINUED - TM-9-2330-379-14P

HUB AND BRAKE DRUM - CONTINUED - TM-9-2330-379-14P_227

HUB AND BRAKE DRUM - CONTINUED - TM-9-2330-379-14P_229

TM-9-2330-379-14P Trailer Cargo: 1-1/2-Ton 2-Wheel M105A3 NSN 2330-01-452-1218 Manual
Page Navigation
224

TM 9-2330-379-14&P HUB AND BRAKE DRUM - CONTINUED ACTION LOCATION ITEM REMARKS HUB AND BRAKE DRUM INSTALLATION 18 Spindle (6) Hub (8) and Slide on. drum (14) 19 Spindle (16) Outer bearing Put onto spindle. cone (13) 20 Inner wheel Put onto spindle with nipple to outside bearing adjusting using wheel bearing socket. nut (12) Do not tighten. WHEEL BEARING ADJUSTMENT 21 Spindle (16) Inner wheel Using wheel bearing wrench, adjust the bearing adjust- bearings. ing nut (12) a. Tighten the adjusting nut (12) until wheel drags slightly. b. .Back the nut off until the wheel spins free and there is no looseness felt when the wheel is rocked. 22 Spindle (16) Two flat washers Slide on. (10) and (11) 23 Wheel bearing Install wheel bearing locknut (9) on the locknut (9) spindle (16) using a wheel bearing wrench. 24 Hub (8) Six cap screws Install parts using a socket wrench. (4), six flat washers (5), hubcap (6), and new gasket (7) 4-149

Privacy Statement
Press Release
Contact