TM 9-2330-379-14&P
LOCKING LUG
This task covers:
a.
Removal (page 4-158)
b.
Installation (page 4-158)
INITIAL SETUP
Tools Materials/Parts
General mechanics tool set
New cotter pin
Equipment Conditions
No special requirements.
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Lower end
Lock plate (2)
Open safety pin (3) and lift from lock
of adapter
and safety pin
plate (2).
(1)
(3)
2
Locking lug (4)
Rotate and move lock plate (2) away from
and lock plate
locking lug (4).
(2)
3
Locking lug (4)
a.
Remove cotter pin (5) holding slotted
cotter pin (5),
nut (6) in place on locking lug (4).
and slotted nut
b.
Discard cotter pin (5).
(6)
c.
Unscrew slotted nut (6) securing
locking lug (4) to adapter (1).
4
Locking lug (4)
Remove locking lug (4) from adapter (1).
5
Lock plate (2)
Remove lock plate (2) and safety pin (3)
and safety pin
if necessary.
(3)
INSTALLATION
6
Lower end
Locking lug (4)
Place locking lug (4) through lower end of
of adapter
adapter (1), ensuring proper position of
(1)
locking lug.
4-158
