TM 9-2330-275-14&P
4-73. DATA PLATE REPLACEMENT (Con’t).
NOTE
On the M332 (SN J089-001 thru 159 and J017-160 thru 350), coupling and
uncoupling instruction plates are secured with rivets. If installing either of
these plates, perform step 1 only.
1.
Position new data plate (1) on dolly and install new rivets (4).
NOTE
If drive screw holes are enlarged too much to securely hold new drive screws,
drill new holes near original holes using data plate as template.
2.
Install data plate (1) on dolly with new machine screws (2) and new Iockwashers (3), if any Iockwashers were
removed.
4-193
