TM 9-2330-275-14&P
4-73. DATA PLATE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions
Tools/Test Equipment
l Dolly set parked on level surface with
Auto shop equipment
handbrakes applied (pars 2-2).
General mechanic’s tool kit
Materials/Parts:
Blind rivets (as required)
Lockwashers (as required)
Machine screws (as required)
NOTE
On the M832 (SN J089-001 thru 159 and J017-160 thru 350), coupling and
uncoupling instruction plates are secured with rivets. If removing either of
these plates, perform step 1 only.
1.
Chisel heads off rivets (4) and use drive pin punch to remove rivets (4) from holes. Remove data plate (1) from
dolly set. Discard rivets.
2.
Drill out machine screws (2) and remove Iockwashers (3), if any, and data plate (1) from dolly set. Discard
machine screws and Iockwashers.
4-192
